Machine reference | FLCI 048 |
Manufacturer | COMEXI |
Type | FI 2108 |
Model | 120 |
Year | 2000 |
Gearless | NO |
Numbers of colors | 9 (8CI + 1 Stack) |
Printing possibilities | 9 / 8+1 |
Types of inks | Water based ink and solvent based |
Web width (mm) | 1270 mm max |
Printing width (mm) | 1240 mm max |
Printing repeat range (mm) | 380 – 800 mm |
On board sleeve change | Yes |
Speed (m/min) | 300 m/min |
Materiels to be printed | film, paper and packaging materials |
Printing unit / | 8 colours, sleeves for aniloxes and plate, chamber doctor, blade, racking motor (pre-positioning) semi-automatic gear mesh system, pre-register, pneumatic pumps Stack unit to be used as varnish or for laminating |
Unwinder | Pneumatic Shaft 3″ and 6″, tension control with dancing roller, electro-magnetic brake |
Reels diameter (mm) | 1000 mm on primary unwinder. 800mm on secondary unwinder |
Rewinder | Non stop rewinder. Tension control with dancing roller, Pneumatic Shaft 3″ and 6″electrical reels unloading device |
Reels diameter (mm) | 1000mm |
Main drive | Bull Gear (Pitch 5mm) |
Length register | Motorized |
Side register | Motorized |
Web guiding | Yes, OPG before printing and rewinding |
Drying system | Thermal oil (CI section and tunnel, and for the additional stack unit |
Video system | Space to install it |
Corona treatment | Softal |
Printing sleeves | Several sets with gears available with the machine |
Anilox sleeves | 16 |
Viscosimeter | No |
Additional information | Hoist for reels loading for both unwinds, Stack unit with double drying hood , unit to apply varnish (possible in register) or to be used for glue application for laminating same side as printing or reverse , with pump Shear knives slitting (3X) |
![](https://defi-sa.com/wp-content/uploads/2024/07/2.jpg)
![](https://defi-sa.com/wp-content/uploads/2024/07/1.jpg)
![](https://defi-sa.com/wp-content/uploads/2024/07/5.jpg)
![](https://defi-sa.com/wp-content/uploads/2024/07/1688975913660-1-1024x768.jpg)
![](https://defi-sa.com/wp-content/uploads/2024/07/4-2.jpg)
![](https://defi-sa.com/wp-content/uploads/2024/07/6-1.jpg)